路堤荷载下管桩复合地基设计理论的试验研究

介绍了管桩复合地基在某高速公路软基试验工程中的应用,并简单分析了其加固效果,进而结合已有的研究成果,提出了一套路堤下刚性桩复合地基的设计理论。通过工程实践表明,该设计理论具有在工程实践中推广运用的价值。     

长江航道承载力概念研究

以国家号召发展长江航道为背景,在生态航道建设的基础上,首次提出以满足生态效益需求为核心,兼顾经济社会发展、长江水资源综合利用等多种目标,实现长江航道建设可持续发展的长江航道承载力概念。借鉴资源承载力理论体系,运用系统理论、协同理论等理论对航道承载力系统的结构关系进行分析,并提出航道承载力的定义、内涵、特征及航道承载力发展机制。     

小方型系数船舶的船体波浪载荷综合研究

从船级社规范对于不符合主尺度比要求的船舶船体梁波浪载荷的规定出发,采用理论预报和船模试验2种综合方式,进行了小于0.6方型系数、高航速、高海况目标船的波浪载荷研究.从规范对波浪载荷的线性理论预报值进行的非线性修正,修正后中拱和中垂波浪弯矩绝对值之和与线性理论预报极值全幅值相等出发,阐述所研究船特殊主尺度比下的模型试验结果、三维非线性水弹性理论预报结果显示出的波浪载荷非线性行为;同时综合模型试验与理论预报的共同规律,研究不同波高、航速、浪向等非常规船型船体波浪载荷的强非线性行为,从而认为规范基于的线性理论预报值进行非线性修正的统一规定太过笼统,进而建议规范对波浪载荷的非线性修正予以进一步的明确区分和规定.     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

基于模糊理论的船舶复合碰撞危险度计算

基于船舶领域和动界的概念,在船舶碰撞几何原理的基础上,利用模糊规则和模糊综合评价方法,本文提出一种船舶复合碰撞危险度的计算方法.确定最近会遇距离(DCPA)、最近会遇时间(TCPA)、两船距离、相对方位、船速比5个主要因素的隶属度函数,并考虑航行区域状况、能见度情况和船舶的操纵性能等对船舶碰撞危险度的隶属度函数修正.用原始数据对3种不同会遇态势进行仿真和对3种不同碰撞危险度计算结果分析比较,结果表明该方法的有效性.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

地下工程注浆技术研究新进展

注浆是土木、水利和矿山等工程建设中重要的防渗和加固技术。文章基于国内外注浆技术研究文献,总结了水泥等颗粒性浆液的“渗滤效应”及“黏度时空变异性”等理论研究成果,论述了非水反应高聚物、CW环氧树脂和微生物菌液等注浆新材料的应用现状及发展前景,介绍了细观力学数值模拟研究的突破性进展,可为地下工程注浆技术发展提供借鉴和启发作用。     

基于家庭属性差异的大学生出行方式选择行为研究

为剖析家庭属性差异对大学生出行方式选择行为的影响，基于非集计理论，构建家庭属性差异的大学生出行选择多元Logit 模型. 根据四川省2 571 份大学生出行行为调查问卷，运用SPSS 软件标定模型参数，获取影响大学生出行选择的主要家庭属性因素，并进行敏感性分析. 结果表明：家庭平均年收入、经济净流对大学生出行方式选择有显著的影响；以航空运输为参考，家庭平均年收入、经济净流对公路运输方式选择的影响大于铁路运输；“祖辈替孙辈购买机票”的折扣票务形式可提高大学生选择航空出行的概率.     

非收放式减摇鳍鳍轴校核算法研究

非收放式减摇鳍作为减摇鳍产品中非常重要的一个组成部分,而鳍轴也是其减摇力矩传力链中非常重要的一环,对于鳍轴综合应力的校核也就成了非收放式减摇鳍设计中的关键。通过比较考虑剪力的新算法以及仅做弯扭综合应力校核的2种算法,及它们在不同强度理论下的状态,综合讨论得出能使鳍轴应力值更加精确的算法。     

囊式空气弹簧机械阻抗特性研究

根据小幅振动的线性叠加原理将囊式空气弹簧分成几个简单的可解析计算的规则区域,结合线性空气波动理论求解出空气弹簧内部声压场的分布。根据弹性薄壳无矩理论推导出旋转壳体状态向量的一阶常微分矩阵方程,利用齐次扩容精细积分法推导出壳体的传递矩阵,结合动力平衡方程求出空气弹簧在位移谐波激励下所受到的激励力,进而得出其机械阻抗。算例结果表明该方法合理可行,为运用近似解析法分析空气弹簧的阻抗特性提供了一种新的思路。